How to make a glass drilling machine

Glass drilling machine is a device specifically designed for precision drilling holes in various glass materials, such as float glass, tempered glass, and laminated glass. This machine adopts pneumatic glass clamping, double side drilling alternatively which avoid broken hole edge by common one side drilling. Pneumatic worktable support large size glass operation. Easy operation, high efficiency.

Installation Steps
Build the machine frame
Design the base according to the size of the glass to ensure a stable placement. Clamps can be installed on the base to secure the glass.

Install the spindle motor
Mount the drill or motor on the vertical guide rails of the machine frame to ensure smooth and wobbly movement.

Build the feed mechanism
You can use a lead screw and handwheel for manual feed, or a small stepper motor to drive the lead screw for automatic feed.

Install the cooling system
Install a small water pump and nozzle near the drill bit to continuously spray cooling water. A 12V DC pump can be used for easy control.

Electrical Connections
Connect the motor, power switch, and water pump switch to ensure easy and safe operation.

Advantage
Debugging and Testing
First, test with scrap glass to adjust the feed speed and water volume to ensure a smooth drilling process and prevent the glass from breaking.
Spindle motor
The utility model has high processing efficiency, good cooling effect, and low production defect rate.

Control button
The operation of the button makes the operation more convenient and simple for workers.

Drilling head
A drill bit (zuant6u) is a cutting tool used by general drills or drilling machines to cut round holes. The basic principle of the drill bit is to rotate the cutting edge of the drill bit, cut the workpiece, and then remove the drill chips from the drill groove. Commonly used drills mainly include twist drills, flat drills, center drills, deep hole drills and nest drills.