Installation And Adjustment
Installation Work environment: the machine should be installed on hard ground where is dry, no dust, no corrosive gas and no high electromagnetic interference. The room temperature should be among 10ºC~40 ºC.Move the main machine and package bed to installation position.
Level: take the packing fixed supporter, support the leveling base, the leveling degree should be less than 0.2/1000mm, then lock the bolt nut.Earth: Connect the earth wire according to electrical connecting drawing. The wire should adopts soft yellow-blue insulating copper wire whose cross section is bigger than 2mm. The earth resistance should be less than 4Ω.Power connection: 380V/50HZAir connection: 0.5~0.8Mpa, connect the air pipe with air source processor and check if there is gas leak.
Clamping cylinder adjustment: put the profile on work table and adjust the cylinders on most proper position and fix the clamping cylinder.
Saw feeding speed adjustment: if the feeding speed is not proper, adjust the speed button to get necessary feeding sped.
Put the profile on work table; adjust the scale plate on supporter to profile height. (indicating height=profile height÷2)
Press clamping button and work button, then the machine starts cutting.
Reducing action: loose work button, the clamping cylinder loose and cutting stop after the motor sliding bed reducing.
three phase, 380V/50HZ
80 x 87 ~ 90 x 60mm
Saw blade diameter
Saw rotational speed
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.