Multi-functional glass cutting machine maintenance manual

by:Eworld Machine     2020-12-04
Way of maintain a multi-functional glass cutting machine, the electrical part of the regular inspection interval - - - Check the content and the matters needing attention 1 in 30 days, pay attention to - - Check the electrical cabinet and electrical components, please be sure to close the external power supply, so as to avoid electric shock! 2, control cabinet internal dry and clean, The vacuum cleaner is preferred) 。 3, the control cabinet internal prohibited, sundry, close cupboard door during the work. 4, check that all parts of the stroke switch cable to see if there is any breakage situation and the touch rod whether there is loose, etc. 5, check all motor, after electrify inspect whether there is a sound or smell, if discovery is unusual situation in a timely manner to contact customer service. 6, check the remote control batteries, button, and look whether there is a touch condition. Second, part of the regular inspection interval - gas path - - Check the content and the matters needing attention 1 in 30 days, check the gas source processor the above-mentioned pressure is normal ( Normal is green marked area in the table 6 bar) 。 2, chuck in peacetime should always check to see if there is broken glass when using, often clean ( Time interval between each week is preferred) 。 3, the next is some there is no need to turn it over, sucker to avoid direct contact with touch glass edge to cut. 4, must be timely check the oil level of the vacuum pump and clean screen pack need to clean and 1 year 6 months need to change the vacuum pump oil. 5, the inlet pressure slightly fine-tuning to 7 - high 8 bar, and then see if there are any obvious throughout all piping and joint leakage phenomenon. Check the pressure adjusting back to the end of 4 - 6 bar. 6, ventilation and manually operation solenoid valve, back and forth movement cylinder to check whether there is gas leakage or other abnormal phenomena. Three, mechanical part inspection contents and note 1, screw elevator parts every week to clean the screw surface and butter ( Winter to heat resistance - 20 - to - 30 degrees of lubricating oil) 。 2, the monthly need to check the screw elevator components on the rotating shaft collar attachment screw and screw head. 3, the walking motor and walking wheels have clearance jitter epidermis and wheel wear. 4, check the air inlet fan every six months whether to have attachments, if there is a clear in time. 5, often want to cleaning and moisture, smooth every three months to check, such as finding can moderate adjustment.
In an age when glass machine company is increasingly important, the researchers believe manufacturers should pay close attention to their results.
go to Eworld Machine to get an amazing offer at favorbale price. the glass machine company upvc welding machine suppliers actually works and is worth a try.
There are multiple advantages of having a upvc welding machine suppliers glass machine company from responsible drilling machine exporters such as Shandong Eworld Machine Co.,Ltd, as they adhere to all the quality standards as you can list and supply all upvc welding machine suppliers essential for the operation of the device without any difficulty.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...