Look at the hubei glass cutting machine equipment maintenance method

by:Eworld Machine     2020-12-15
Together to learn about hubei glass cutting machine equipment maintenance methods: in the use of air compressor, air compressor as far as possible be placed in the site of the air is clean. Keep ventilation and dry. Distance can be extended by solution gas zone. 1, oil and gas emissions: normal have moisture in the air. In air compressor work, not only will the air compressed output, will also be a fair amount of pressure into the machine. Inside the machine lubricating oil evaporation and condensation at the same time, it is easy to form the oil-water mixture, serious quality problems, such as paint, and clogging when sandblasting gun became a common phenomenon, a glass cutting machine air compressor. There were half a tank of water So often put a put the oil-water mixture has become one of the most common work of the maintenance of air compressor. If there is a best add oil and water filter. 2, placed flat: some air compressor due to improper maintenance in using wheels fall, stents fall off. Some users use wood such as set up an Angle. Air compressor sloshing around at work. And many users are not too care about it. The reality is. Air compressor four corners at work must be consistent stable cao bang. Otherwise the air compressor piston and cylinder unnecessary wear and reduce life. More often than not, if a compressor wheel off, then not far from the bad. So if air compressor protection from falling out, one must find a way to welding. Don't temporary pad just make do. 3, lubricating oil supplement and replacement: a lot of customers until air compressor with bad, hubei glass cutter never replace lubricating oil at a time. Air compressor is more bad than air compressor is used is being worn. Lubricating oil cylinder devices are generally need to participate in work. Like cars, will need to periodically check the supplement or replace the lubricating oil. This is also often do maintenance work. Will always see oil level line, lubricating oil needs to be changed regularly. Rapid loss of lubricating oil is found, be sure to stop the air compressor to send a check. Mr Wade is a new product research and development, production, sales and technical services in the integration of new enterprises, the company's main products are: hubei glass cutting machine, fully automatic profile cutting machine, special-shaped beveling machine and so on, welcome friends from all walks of life come to visit, guidance, business negotiations: 13197170027
An increasing dependence on the use of glass machine company upvc welding machine suppliers has made numerous changes in the upvc welding machine suppliers industry over the past decades.
Compare the various types of that are available. At Eworld Machine, the range is constantly being updated with new models, technical details and competitive prices.
The same determination is critical for business owners. The journey in glass machine company business is both a challenging and rewarding experience.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...