Glass cutting machine is a common machine tool, but what is the correct operation of glass cutting machine
In the process of operation what items need to be aware of?
Today, Mr Wade's small make up for everybody detailed introduction of hubei glass cutting machine operation method and the matters needing attention!
Operation method: 1, completes the safety protection measures, gloves, safety glasses, put on a special iron shoes.
2, open the power switch.
Start the ncstudio program, all first dial back mechanical origin, then back to the fixed electrical contractor, then load the need to apply the program.
And will these programs for confirmation.
3, will need to cut the glass is placed on the glass cutting table.
4, blowing on the cutting machine button, so that the glass can take and can move freely on the cutting table, easy to locate.
5, and the glass on the cutting table set, press the stop button, the night make suction function, and then to breathe in through your feet on the switch, use of unusual function would strip firmly fixed in proper position of the cutting machine, easy cutting.
6, cutting is finished, press the stop switch, to stop inspiratory function, then, will blow qigong can open again.
7, open the machine blowing air switch, the mesa clean up debris, dust and so on, then cut the whole piece of glass move parallel to the points on the stage, must be careful in the process of moving.
8, the glass for sorting table, the edge material around the clean down first, and on the corresponding position of the specified, then, to cut the whole piece of glass according to mark into small pieces.
9, after each small piece of glass distinguishes the vertical interlaced ChaJia, this process must not omit, and make sure the glass of the vertical Angle.
10, after the completion of a piece of glass cutting machine with the air gun of a platform and a table clean, and can then be placed under a piece of glass, proceed to the new job.
Note: 1, glass surface can't be scratched or white dot phenomenon;
2, in cutting glass is in great quantities, it is necessary to detect the performance of the cutting machine, testing method is to examine the effect of the cutting machine cut the first piece of glass.
3, move the glass before to see if there are any cracks, glass itself if there is crack we can move more carefully, or directly, avoid burst in the process of moving.
Operation method and use of the Mr Wade is above considerations, we hope you when using cutting machine must be in strict accordance with the safety procedures, and pay attention to the small make up the note, I mentioned guarantee his safety.
If there is a need to glass cutting machine and other related products, please consult hotline: 13197170027
At the same time, as the recent research of Eworld Machine shows, the benefits of improved productivity and firm performance can make implementing basic management practices worth it.
If you already use glass machine company elsewhere or want the ability to offer restricted chat access to certain individuals, glass machine company upvc welding machine suppliers offers you the most flexibility.
Shandong Eworld Machine Co.,Ltd provides a way for you to understand your customers, to learn what makes them unique and what motivates their behavior. We can then leverage that wealth of information to personalize our interactions and demonstrate that glass machine company is valuable to our customers.
upvc welding machine suppliers glass machine company is characterized by various advantages, such as upvc welding machine suppliers, upvc welding machine suppliers and upvc welding machine suppliers, which is not the case with other glass machine company.
glass machine company is one of the best products sold in the market today.